How To Make A Ski Tow Bar?

Making your own ski tow bar is a great weekend project that can save you money. It can be hard to get the kids interested in skiing or snowboarding. One way to make it more fun is to tow them behind you on a ski tow bar. 

But the question is how to make a Ski Tow bar? Ski tow bars can be made out of a number of different materials, but the most common are steel or aluminum. 

You can buy a kit, or you can make one from scratch using materials that you have around your home. If you’re not sure how to make your own ski tow bar, read our article to find out the step-by-step process. 

What You Will Need To Make A Ski Tow Bar?

You will need some basic supplies to make your ski tow bar. This includes a drill, saw, screws, washers, and bolts. You will also need some rope or cable to tie the bar to the back of your car. Finally, you will need a ski or snowboard to attach to the bar.

What You Will Need To Make A Ski Tow Bar

Making a ski tow bar is a relatively simple process. First, you will need to drill holes into the bottom of your ski or snowboard. Next, you will need to screw the washers and bolts into the holes. Tighten the screws so that the washers are snug against the ski or snowboard.

Finally, you will need to tie the rope or cable to the back of your car. Make sure that the rope or cable is long enough to reach the ground. Once you have tied the rope or cable to the car, you are ready to ski or snowboard!

Skiing, snowboarding, ski tow bar, car, rope, supplies, drill, saw, screws, washers, bolts, tie, attach, simple, process, holes, bottom, ski, snowboard, tighten, washers, snug, ground, long, reach, ready, ski, snowboard.

Step-By-Step Guidelines Of How To Make A Ski Tow Bar?

Assuming you have all the necessary tools and materials, making a ski tow bar is actually quite straightforward. Here’s a quick step-by-step guide:

How To Make A Ski Tow Bar

  1. Begin by measuring and cutting the PVC pipe to the desired length. If you’re unsure of the exact length needed, it’s always better to err on the side of caution and cut the pipe a bit longer than necessary. You can always trim it down later if needed.
  1. Next, use a hacksaw to make two notches in the pipe, each about an inch from the end. These notches will be used to attach the tow rope later on.
  2. Once the notches are cut, sand down the edges of the pipe to smooth them out.
  3. Next, use PVC cement to glue the two end caps onto the pipe. Make sure that the end caps are flush with the ends of the pipe, and that there are no gaps between the cap and the pipe.
  4. Once the glue has dried, drill two holes into each end cap. These holes should be just big enough to thread the tow rope through.
  5. Thread the tow rope through the holes in the end caps, and tie a knot on each end to secure it in place.

And that’s it! Your ski tow bar is now ready to use. Just attach it to your skiis and away you go.

Things To Consider Before Making A Ski Tow Bar

  1. Determine the size of the ski tow bar. This will depend on the weight and size of the skier, as well as the type of skiing they will be doing.
  2. Choose the material for the ski tow bar. This can be either metal or plastic, but it is important to make sure that it is strong enough to support the weight of the skier.
  3. Consider the shape of the ski tow bar. This will affect how easy it is to use, as well as how stable it is while in use.
  4. Make sure that the ski tow bar is compatible with the ski bindings. This is important for safety reasons, as well as to ensure that the ski tow bar works properly.
  5. Test the ski tow bar before using it. This will help to ensure that it is strong enough and that it works properly.

Bottom Line

Ski tow bars are a great way to enjoy the slopes with friends and family. The process of making a ski tow bar is not difficult, but it does require some basic tools and skills. By following these steps and being mindful of the necessary precautions, you will have a new ski tow bar to help get your winter adventures off to a great start. 

James Pope

James Pope is a marine engineer and an ex-navy. He is the owner and chief editor of this site, Worldofboats. After retiring from the navy, James spent most of his time researching different types of boats, marine resources, etc. And he created this site to share his knowledge and finding with a wide range of people who are new on this journey and looking for experts guideline for purchasing new boats.

Recent Posts